Specially formulated product designed to promote adhesion to many difficult surfaces.  Promotes the adhesion of wallcoverings and emulsion paints.

Reduces seam splits, raised edges and bubbling of wallcoverings.

Seals absorbent materials.

Primer ACP is not suitable on non-absorbent surfaces (ceramic, glass, metal, gloss paint etc.)

Surface Preparation

Walls should be sound, dry, clean and free from damp, dust and grease or any contaminant that might affect adhesion.

Allow new plaster to dry out completely.

Application

Seltex Primer ACP should be diluted with water dependent on the surface being primed.  Stir before use, apply one coat only by brush and allow to dry before adhesive application.

It is recommended that a good bond has been achieved between Primer ACP and the surface before commencing hanging.

2 or 3 drops only should be hung and allowed to dry prior to completion to ascertain that a satisfactory bond is being achieved.

Dilution Rate

1 part Primer ACP to 4/5 parts water.

Coverage

1:4 approximately 40 sq metres / kg

Cleaning and Storage

Tools and equipment should be cleaned with water immediately after use.

Do not use at a temperature below 12°C (54°F).

PROTECT FROM FROST

Safety Information

Primer ACP should be kept away from children and animals.